20T Semi Continuous Waste Plastic Pyrolysis Equipment
Performance Feature
Integral design, no need to precast foundation, quick and easy installation.
Airtight high temperature material feed, saving heating time and reduce the temperature loss.
Adopt multilevel cooling design to get more fuel oil.
Hot air heating, unique heat cycle design, heated more evenly, reducing the operating cost.
Airtight high temperature slag, no dust, clean and environmentally friendly.
Technological Process
1.Broken tyre transported to feeder firstly by conveyor, then to reactor.
2. Oil and gas from pyrolysis go into gas-liquid separating tower and separate, and enter into condenser to liquify , to get fuel oil, then enter into oil storage tank.
3. Coarse carbon black and steel wire from pyrolysis are output by automatic slag remover, transported to carbon black processing system by cooling hoist. Separate steel wire and carbon black through the magnetic separator,to get industrial carbon black and steel wire.
4. Shatter carbon black, to get industrial carbon black after deeply processing. Steel wire compressed into a piece of scrap processing.
5. Flammable gas enter into waste gas process tank to desulfur. Then extracted by vacuum pump, enter into water sealed tank and send to hot air furnace to burn.
Main Performance Parameter
| Item | Type | XFLJ--10 | XFLJ--20 |
| Capacity /24h | 10T | 20T |
| Operating temperature | ≤650° |
| Fuel | Fuel oil, natural gas, liquefied petroleum gas |
| Heating way | Hot air circulation heating |
| Tire requirement | Block tyre ≤5mm |
| Working pressure | Normal pressure |
| Methods of flame retardant | Steam blow |
| Fuel consumption | 200 kg | 400 kg |
| Boundary dimension | 7300 × 2400 × 3100(mm) | 7300 × 2400 × 3100(mm) × 2 |
| Total power | 85 kw | 160 kw |
| Power consumption | 40 kw/h | 75 kw/h |
| Floor space | 25000 mm × 5500 mm | 25000 mm × 11500 mm |
| Highest point of installation | 5000 mm | 5000 mm |
Remark: This parameter is just for reference. Size change caused by design improvement will not
inform customers specially. Please refer to documents enclosed with products.
Product Recovery Rate
1. Oil: 40-45%
2. Carbon black: 32-36%
3. Steel wire: 14-16%
4. Syn gas: 5-8%
Certifications
WELCOME to Qingdao,Check the running 15t/day fully continuous,8t/day semi continuous
and the tyre oil distillation plant.
If you need other information,pls contact me,we will talk more details. Best Regards,Raymond
){kind=link}